Vacmaster 8 Gallon HEPA Vac with 2 Stage Motor, VK811PH
1.8 Gallon* Crush Proof Polypropylene Tank
2.Certified HEPA System (99.97% efficient on .3 microns)
3.2-Stage Industrial Motor
4.Max Waterlift 106 In. ; Base Size: 27.5"W
5.Max CFM 125
6Voltage: 120V-60Hz ;
7Cord Length: 30 Ft. ;
The Vacmaster Industrial 8 Gallon Wet/Dry Vac is a certified HEPA system and has an ultra quiet 2-stage industrial motor. It features 4 levels of filtration inlcuding a HEPA cartridge filter, microfiber pre-filter, high-efficiency fine dust filter bag with closure flap, and an exhaust filter--all for HEPA compliance. To qualify as a HEPA system, a unit must capture and retain 99.97% of all contaminants down to 0.3 micron in particle size. In independent tests, the Vacmaster Industrial VK811PH showed an efficiency of 99.996% in the 0.3 micron particle size range, meeting and exceeding the HEPA efficiency requirements set by the United States Environmental Protection Agency (EPA) and required under the Renovation, Repair, and Painting (RRP) Program. This commercial vac also comes with a lighted plug, crushproof industrial hose, and foam filter sleeve for picking-up liquid materials--all at an affordable price.
* "Tank Size" refers to the actual tank volume, and does not reflect capacity available during operation.
† "Peak Horsepower" is a term used in the wet-dry vac industry for consumer comparison purposes. It does not denote the operational horsepower output of a wet-dry vac, but rather the horsepower output of a motor, including the motor’s inertial contribution, achieved in laboratory testing. In actual use, motors do not operate at the peak horsepower shown.
|Tank Size||8 Gal.|
|Motor||2-Stage Industrial Motor|
|Cord Length||30 Ft.|
|Crushproof Hose Diameter||1-7/8 In.|